In Port Settings tab, set the correct serial port parameters: 9600 baud, no parity, 1 stop bit.In the Serial Ports tab select the General tab, and set up the serial port as 'Card Reader' and select an appropriate End Of Line Character (for instance 13 ) Enable the 'Active'check box In the DS Admin tool, open the VAU(s) folder and select the computer.It is also possible to use software like NetSerial from PCMicro to define virtual COM-ports in that case the connection between the VAU and ICX/AlphaCom can still be via IP.įor detailed programming instruction please download the Digital Sentry Operation and Configuration manual from the Pelco web-site The ICX doesn't have any serial ports for such use, so Ethernet to Serial converter will be required. The AlphaCom has 2 physical serial ports, Ethernet-Serial port converters will need to be used in case there are more than 2 VAUs. Note that Digital Sentry only has serial ports available for this function. Each VAU must have its own data connection to ICX/AlphaCom. In that case there may be multiple VAU's (Video Acquisition Unit) to which cameras are connected. This paragraph assumes that Digital Sentry has been setup and is working.ĭigital Sentry can be a large system. When used with the ICX System, the following license is required in the ICX in order to enable the EDO port: 1002602400 - ILI-IF Interface enabling Digital Sentry can be set up to record and display the appropriate camera when it receives the correct strings. ICX or AlphaCom can send matching strings out from one its EDO-ports on events such as Call Request and Call. The integration is using the EDO port.ĭigital Sentry has an ASCII string based alarm input option. The Digital Sentry can be integrated with the ICX-AlphaCom system or the AlphaCom XE system.
0 Comments
Leave a Reply. |